top of page

POLYURETHANE

High performance polyaspartic systems and membrane solutions for a wide range of commercial applications.

​

  • Slip Resistance (ADA).

  • LEED® and Green Seal® requirements.

  • Strong and Tough Floor

  • Excellent Chemical and Abrasion Resistance

Kitchen-Epoxy-gif

P-AU100 ULTRA

 

ALIPHATIC URETHANE ULTRA

​

P-AU100 ULTRA is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat. It is available in clear gloss, clear satin and can be pigmented. Cures to an inert, tough, impact, abrasion and chemical resistant finish. Resistant to Skydrol, betadine and conventional hot-tire staining. It is used as an upgraded finish coat on PurEpoxy products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemicals.

P-AU100 ULTRA
15384462_1252372408152780_49371280527870

PP-HFAST


HYBRID HI-PERFOMANCE POLYASPARTIC (FAST)

​

PP-HFAST is a two-component, 85% solid, rapid curing, hybrid polyaspartic coating system designed as a decorative yet durable coating for commercial and industrial flooring. Formulated with aliphatic chemistry, PP-HFAST is color stable allowing it to take UV exposure without color shifts seen with other coating systems such as epoxies. PP-HFAST is a 1:1 mix ratio system with sufficient pot life to be rolled, brushed, or sprayed . It has a robust application window with ability to apply at low temperatures and high humidity.

PP-HFAST
backcover3.jpg

PP-S85

 

HYBRID HI-PERFORMANCE POLYASPARTIC (SLOW, NO ODOR)

​

PP-S85 is a two-component, slow curing, no odor, hybrid polyaspartic coating system designed as a decorative yet durable coating for commercial and industrial flooring. Formulated with aliphatic chemistry, PP-S85 is color stable allowing it to take UV exposure without color shifts seen with other coating systems such as epoxies. PP-S85 is a 1:1 mix ratio system with sufficient pot life to be rolled, brushed, or sprayed . It has a robust application window with ability to apply at low temperatures and high humidity.

PP-S85
Photo 2020-09-02, 9 48 25 AM.jpg

PP-100SX

​

HYBRID 100% SOLID HI-PERFORMANCE POLYASPARTIC

​

PP-100SX is a two component 100% solid, polyaspartic coating system. It provides outstanding appearance, superior chemical, U.V.,and solvent resistance. It exhibits excellent physical properties.

PP-100SX
PUMEMBRANE1.jpg

PU-MEMBRANE

​

URETHANE WATERPROOFING MEMBRANE

​

PU-MEMBRANE is a solvent less, two component urethane waterproofing membrane. It is designed to be used as a layer to bridge new cracks in concrete. It exhibits very good mechanical properties, such as high elongation and tear resistance.

PP-MEMBRANE
backcover3.jpg

P-AU100

​

ALIPHATIC URETHANE

​

P-AU100 is a two-component, high solids, UV stable moisture-cure polyurea topcoat. It provides a high-gloss finish with superior chemical resistance. It exhibits excellent physical properties and is designed to withstand industrial traffic. It can be applied over an epoxy-primer or used to re-coat existing epoxy or urethane floor.

P-AU100

GET IN TOUCH

ASK US ABOUT WHOLESALE PRICING, INSTALLATIONS OR PRODUCT INFORMATION.

bottom of page